In the field of panel storage, traditional methods often face many challenges. For example, manual handling is not only inefficient but also prone to safety accidents, with a high risk of panel deformation. According to industry statistics, in traditional panel storage operations, the panel deformation rate can reach up to 10%, which brings significant economic losses to enterprises. At this time, the emergence of plate stacking spreaders provides an effective solution.
The plate stacking spreaders produced by Dalian Tiding Heavy Industry are made of high - strength materials, which can withstand a large amount of weight. The material strength can reach 800MPa, ensuring long - term and stable operation in heavy - load working conditions. This high - strength design not only extends the service life of the spreader but also reduces the maintenance cost.
The unique clamping system can firmly grip the panel, reducing the risk of panel sliding during the lifting process. The multi - point support structure evenly distributes the weight of the panel, effectively reducing the deformation rate of the panel during storage and handling. The panel deformation rate can be controlled within 1%, far lower than the industry average.
These spreaders have a wide load - bearing range, from small - sized panels to large - scale heavy - duty panels, they can all be easily handled. The load - bearing capacity ranges from 1 ton to 20 tons, which can meet the needs of different customers.
Dalian Tiding Heavy Industry's plate stacking spreaders offer multiple drive modes, including mechanical, electric, pneumatic, and hydraulic. Each drive mode has its own characteristics and applicable scenarios.
| Drive Mode | Advantages | Disadvantages | Applicable Scenarios |
|---|---|---|---|
| Mechanical | Simple structure, low cost, and high reliability | Low degree of automation, requiring manual operation | Small - scale storage and handling scenarios |
| Electric | High degree of automation, easy to control, and energy - efficient | Requires a power supply, and the maintenance cost is relatively high | Medium - scale storage and handling scenarios with stable power supply |
| Pneumatic | Fast response speed, suitable for high - frequency operations | Limited power, affected by air quality | Light - load and high - frequency handling scenarios |
| Hydraulic | High power, strong load - bearing capacity, and stable operation | The hydraulic system is complex, and the maintenance cost is high | Large - scale heavy - duty panel handling scenarios |
The installation of the plate stacking spreader needs to follow strict procedures. First, ensure that the installation site is flat and firm. Then, assemble the spreader components according to the installation diagram. Finally, connect the drive system and conduct a test run. The following is a simple installation process diagram:
During operation, operators must be trained. They need to check the spreader before each use, including the clamping system, drive system, etc. During the lifting process, ensure that the panel is evenly stressed to avoid tilting and sliding.
Regular maintenance is crucial to ensure the normal operation of the spreader. It is recommended to conduct a small - scale maintenance every month, including cleaning, lubrication, and inspection of key components. Conduct a large - scale maintenance every six months, including component replacement and system debugging.
Many well - known enterprises in the industry have used Dalian Tiding Heavy Industry's plate stacking spreaders and have achieved good results. For example, a panel manufacturing enterprise reduced the panel deformation rate from 8% to 1% after using these spreaders, and at the same time increased the storage and handling efficiency by 30%. According to industry standards, the service life of a high - quality plate stacking spreader should be more than 10 years, and Dalian Tiding Heavy Industry's products can fully meet this requirement.
"Since we started using Dalian Tiding Heavy Industry's plate stacking spreaders, our panel storage and handling operations have become much more efficient and safer. The deformation rate of the panels has been significantly reduced, which has brought us obvious economic benefits." - A customer feedback
In conclusion, if you are looking for a reliable solution to improve panel storage efficiency, Dalian Tiding Heavy Industry's plate stacking spreaders are your ideal choice. Contact us to get a customized spreader solution and technical support, and help you upgrade your panel storage!
